AUR is having problems

Hope it’s not caused by Manjaro users. :grinning:

2 Likes

Yes, I use yay and it is not responding:

A bug report has been issued: https://github.com/Jguer/yay/issues/1682

1 Like

Hi

I tried to install qtile-git (using paru) and after 37 minutes it was decided that it would not build!
I did a reboot and tried to install again but now I got a message that say.

-> response decoding failed: invalid character '<' looking for beginning of value

I went on my other laptop and tried to install from aur and got the same message!
I have never seen this before and have no idea if it is on my end…
Anyone seen anything similar before?

On one of the laptops I have pamac-aur installed and with pamac-aur I could install from aur. Isn’t that strange?

Thankful for a nudge in the right direction!

womp

Hi again!
I am very sorry for causing “cross-post”!!

I have been looking in to this a little bit and now I do not think it’s an aur-problem. It’s more likely to be a yay-problem (but just likely!).
I did not have paru installed on one of the laptops so I tried to use baph and that did not work. (baph -i …do not recognize the name “paru”).
I used makepkg and with paru I can install from aur.
Is there an yay-update on the way?

womp

1 Like

paru is a good alternative to yay though I admit, I do like yay

2 Likes

It better not be Pamac again.

P.S. It seems that is is a Yay issue. Just use Baph anyway baph -u.

1 Like

I even use baph on Arch, after all the years on Trizen.

1 Like

I’m having problems too with paru.

paru -Syu
[sudo] password for koo: 
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
 core                                         138.1 KiB   444 KiB/s 00:00 [------------------------------------------] 100%
 extra                                       1555.3 KiB  2017 KiB/s 00:01 [------------------------------------------] 100%
 community                                      6.1 MiB  3.54 MiB/s 00:02 [------------------------------------------] 100%
 multilib                                     149.1 KiB   331 KiB/s 00:00 [------------------------------------------] 100%
 archlabs is up to date
error: GPGME error: No data
error: GPGME error: No data
error: failed to synchronize all databases (unexpected error)
1 Like

Thank you very much, I didn’t know him, just like baph. :+1:

Just tried baph same out come.

baph -u
[sudo] password for koo: 
error: GPGME error: No data
error: GPGME error: No data
:: Synchronizing package databases...
 core                                         138.1 KiB   502 KiB/s 00:00 [------------------------------------------] 100%
 extra                                       1555.3 KiB   680 KiB/s 00:02 [------------------------------------------] 100%
 community                                      6.1 MiB  3.81 MiB/s 00:02 [------------------------------------------] 100%
 multilib                                     149.1 KiB   275 KiB/s 00:01 [------------------------------------------] 100%
 archlabs                                      28.1 KiB  15.1 KiB/s 00:02 [------------------------------------------] 100%
error: GPGME error: No data
error: GPGME error: No data
error: failed to synchronize all databases (unexpected error)

Baph is working fine for me. No issues. Yay, not working.

Yes, baph is working fine. The problem is from AUR web rpc again. trizen 1:1.65-1 also works now.

1 Like

I can’t install anything from the AUR with Baph though. I just tried installing Paru and I’m getting the following error:

https://github.com/search?o=desc&q=qutebrowser&s=updated&type=Repositories

Same here, can’t install anything from AUR with baph.

1 Like

baph is not working yet, use trizen 1.65-1. AUR (en) - trizen

Thanks, don’t really need it at this time. Just trying a few AUR helpers that I usually use.

My problem is now fixed.

sudo rm -R /var/lib/pacman/sync
[sudo] password for koo: 
┏>>> {Sat Feb 05 03:08 PM}
┗>>> koo@archlabs ~ 22 files = 43M ~ $ paru -Syu
:: Synchronizing package databases...
 core                                         138.1 KiB   495 KiB/s 00:00 [------------------------------------------] 100%
 extra                                       1555.2 KiB  2.34 MiB/s 00:01 [------------------------------------------] 100%
 community                                      6.1 MiB  3.89 MiB/s 00:02 [------------------------------------------] 100%
 multilib                                     149.1 KiB   248 KiB/s 00:01 [------------------------------------------] 100%
 archlabs                                      28.1 KiB  16.3 KiB/s 00:02 [------------------------------------------] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...

Packages (10) elfutils-0.186-4  fftw-3.3.10-2  libelf-0.186-4  libusb-1.0.25-2  libxkbcommon-1.4.0-1
              libxkbcommon-x11-1.4.0-1  luajit-2.1.0.beta3.r384.g1d7b5029-1  mesa-utils-8.4.0-7
              qt5-base-5.15.2+kde+r297-1  xplc-0.3.13-9

Total Download Size:   17.55 MiB
Total Installed Size:  80.75 MiB
Net Upgrade Size:      -0.34 MiB

:: Proceed with installation? [Y/n] 
1 Like

yay! why you no use makepkg?

2 Likes

Back to normal. Some package versions are messed up though.